MISCELLANEOUS

Safety Lanyard Cords

Safety Lanyard Cords are designed to shut off your outboard in the event the operator falls overboard (lanyard must be properly connected to both the outboard and the operator). Without this important safety feature your outboard would continue to run without you at the controls. This item is necessary to start your outboard.
Replacement lanyard cords can be purchased through your local dealer.

Part Number Description Applicable Models
35306-8210M Safety Lanyard Cord All Models
(except MFS9.9A/MFS15A & BFT Models)
HZV4-36182-651 Safety Lanyard Cord BFT models only

Touch-Up Paint

To keep your Tohatsu outboard looking new and to help prevent corrosion, touch-up paint is available from your local dealer.

2-Piece Switch Panel

This new 2-piece switch panel is the perfect replacement for our standard 1-piece switch panel. The 2-piece panel, available in white UV resistant plastic to match your white dash, allows you to place the lanyard cord & key switch in different positions rather than the standard vertical position of our 1-piece panel. Panels also come with decals for key switch & lanyard functions. Mounting holes are the same size and position as the standard 1-piece panel.

Replacement Spark Plugs

All spark plugs meet the original specifications as the ones that came with your Tohatsu outboard.
Replacement spark plugs can be ordered through your local dealer.

Part Number Description Applicable Models
97010-1011M NGK - BP6HS-10 M2.5/3.5 (2-Stroke)
97010-1005M NGK - BP7HS-10 M5 through M40 (2-Stroke)
97010-1009M NGK - BP8HS-10 M50 through M140 (2-Stroke)
97010-1103M NGK - DCPR6E MFS2.5 through MFS50 (4-Stroke)
97011-1108M NGK - PZFR6H MD40/50B (TLDI)
97011-1110M NGK - IZFR6J MD40B2 through MD90B (TLDI)
97011-4017M Champion - RC12ECC MD40A through MD90A (TLDI)
HZZ3-31908-003 NGK - LMAR6C-9 BFT60 (4-Stroke)
97011-1111M NGK - IZFR6Q (Iridium) MD75/90C2 (TLDI)
97011-1109M NGK - IZFR5J (Iridium) MD115A/115A2 (TLDI)
HCO-9807B-5617C NGK - IZFR6K-11E BFT75 through BFT250 (4-Stroke)

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
338-60218-2 M2.5/3.5/8/9.8 (2-Stroke) Mounts under cavitation plate
25-70hp (2-St) & 40/50 (TLDI) Inside the water passage

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3B7-60218-1 M40D2/M50D2 (Manual Tilt) Mounts on bottom of stern bracket
70-140hp (2-Stroke & TLDI)
MFS40/50A (4-Stroke)
Inside the water passage

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3H6-60218-0 4-6hp (2-Stroke& 4-Stroke)* Mounts on side of cavitation plate.
MFS40/50A 4-Stroke Bracket (2)

note: for 5B 2-stroke prior to serial #16748, use 369-60218-1 [round anode].

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3KY-60218-0 MFS40/50A 4-Stroke Lower unit (2)

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3P0-60218-0 MFS40/50A 4-Stroke Inside the water passages (3)

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3V9-60218-0 M9.9-20hp (2 -St & 4-St)* Mounts under cavitation plate.

note: fits 15/18hp 4-stroke from serial #019935XC ~ #019256XD.

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
369-60218-1 MFS8/9.8/9.9/15/18/20/25/30 (4-Stroke)* Inside the water passage.
MD75/90C2 TLDI Exhaust plate

note: also fits 5B 2-stroke prior to serial #16748.

Anode

Easy to replace zinc anode protects your motor from galvanic corrosion in saltwater environments.

Part Number Description Applicable Models
3C7-60218-2 M40D2 - M140A2 w/PTT 2-Stroke & all TLDI models Mounts on bottom of stern bracket.

Trim Tab

Made of sacrificial anode metal, trim tabs protect the engine from corrosion and reduce propeller torque for easier steering.

Part Number Description Applicable Models
3C8-60217-1 Trim Tab M25C3 through MD50B2

Trim Tab

Made of sacrificial anode metal, trim tabs protect the engine from corrosion and reduce propeller torque for easier steering.

Part Number Description Applicable Models
3V1-60217-0 Trim Tab MFS8/9.8/15/18/20* (4-Stroke)

note: fits 15hp/18hp 4-stroke from serial #023985XD and higher.

Trim Tab

Made of sacrificial anode metal, trim tabs protect the engine from corrosion and reduce propeller torque for easier steering.

Part Number Description Applicable Models
348-60217-0 Trim Tab M40C (2-Stroke)

Trim Tab

Made of sacrificial anode metal, trim tabs protect the engine from corrosion and reduce propeller torque for easier steering.

Part Number Description Applicable Models
3B7-60217-1 Trim Tab M60C - M140A2 (2-St) & MD70-115 (TLDI)

Replacement Filters

Tohatsu offers a variety of replacement fuel, air and oil filters to keep your outboard running at peak performance.

Part Number Description Applicable Models
3T5-10130-0 Air Filter for Compressor MD40A through MD90A & MD40B through MD90B, MD115A (TLDI)
3GF-10130-0 Air Filter for Compressor MD40/50B2, MD75/90C2, MD115A2 (TLDI)
369-02230-0 Fuel Filter M5B & M8/9.8B (2-Stroke)
369-02230-0 Fuel Filter MFS4 through MFS20 (4-Stroke)
346-02230-0 Fuel Filter M9.9 through M70A2 (2-Stroke)
3AC-02230-0 Fuel Filter MFS25/30B (4-Stroke EFI)
3B7-02230-0 Fuel Filter M40D through M90A (2-Stroke)
3T5-02230-0 Low Pressure Fuel Filter MD40 through MD90B (TLDI)
3T5-B101430 High Pressure Fuel Filter MD40 through MD115 (TLDI)
3T1-02230-0 Low Pressure Fuel Filter MD75/90C2, MD115 (TLDI)
3C7-02230-0 Fuel Filter M115A through M140A (2-Stroke)
3R0-07615-0 Oil Filter MFS9.9 through MFS50 (4-Stroke)
HPFB-15400-014 Oil Filter BFT60 (4-Stroke)
HPLM-15400-A01PE Oil Filter BFT75 through BFT250 (4-Stroke)

Water/Fuel Separator Filter

Easily connected between your fuel tank and engine, the 10 micron filter traps over 98% of the water that may be present in the fuel tank before it reaches your engine. This prevents moisture from damaging the critical engine parts such as the electric fuel feed pump and the fuel injection system or carburetors. This is especially important with today's ethanol based fuels which attracts water more easily than regular fuels. 1/4" NPT fittings required (not included)

Part Number Description
99999-37851 Water/Fuel Separator kit (includes one filter)
3Y902-2340M Replacement 10 micron filter

The Unikas Water/Fuel Separator Filter

The Unikas Water/Fuel Separator Filter installs between your fuel tank and engine and is designed to trap 99% of any water that may be present in the fuel. Unlike traditional water/fuel separators, Unikas separators feature a transparent bowl with floating ring to quickly see at a glance how much water has been trapped. Also features a drain screw allowing the user to drain any accumulated water without having to remove the filter. Approved and recommended for use with ethanol blended fuels. Kit includes one 10 micron filter and connectors. Fits all outboard brands with a maximum fuel flow up to 31 gallons/hour (117 liters/hour).

Part Number Description
99999-UF10K UNIKAS UF-10 Water/Fuel Separator Kit (includes one filter)
99999-UF10RF Replacement 10 micron filter for Unikas UF-10K (includes replacement o-ring)

Vertical Starting Device Kit

Vertical Starting Device Kit converts a manual start from a horizontal to vertical direction pull.

Part Number Description Applicable Models
399-B05180-0 Vertical Starting Device Kit M4C/5B (2-Stroke) & MFS4/5/6B (4-Stroke)

Steering Lock Kit

Steering Lock Kit allows motor to be locked into a fixed position to allow boat to be steered using the boat's rudder. Perfect for sail boaters that want to use their rudder to steer instead of the motor. Kit includes locking bracket, all necessary hardware and installation instructions.
Caution: Once installed, the motor is locked in place and the tiller handle cannot be used to steer the boat unless kit is removed.

Part Number Description
3GR625000M 4/5/6hp - Fits "B" and "C" 4-stroke models only
3V1625000M 8/9.8hp - Fits "remote" (EP or EPT) 4-stroke models only

Find a Dealer

Use our handy database to locate the dealers in your area! Search by either your zip code and address to find the Authorized Dealer/Service Center nearest you.