Currently showing the international website

Switch to

Continue
close

OUTBOARDS

BFT115A

HIGH POWER

Our 115 hp four stroke outboard is an in-line 4 cylinder, with a DOHC 16 valve design, creating a compact and powerful engine. The BFT 115hp includes dual stage induction for improved performance and Lean Burn control for better fuel economy while at cruising speeds. This motor also features Maximum Acceleration System, which improves acceleration at low speeds. A quick movement of the throttle control activates the Maximum Acceleration System, advancing the ignition curve quickly. This will greatly improve “Hole Shot”. With on board warning systems such as low oil pressure, overheat, low battery warning, start in gear protection and over-rev limiter, the Tohatsu 115 hp four stroke engine gives you peace of mind while on the water.

Tohatsu 115 hp 4-Stroke Benefits

  • High output alternator produces 30 amps of power at 1,000 rpms and 40 amps at 2,000+ rpms
  • Available in 20” & 25” shaft lengths
  • In-line 4 cylinder for excellent performance and sleek design
  • Double sealed multi-layered paint process to help protect against corrosion
  • Ultra-low 3 star CARB emission approved

4-Stroke Technology

  • Dual stage induction for improved performance
  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • 3-way cooling system to help protect against overheating
  • Non-linear rubber mounts provide smoother operation at all engine speeds
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized fuel injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Low battery voltage warning
  • Water in fuel warning
  • Start-in-gear protection
  • Over-rev. limiter

FEATURES

SPECIFICATIONS

Engine 4 Cylinder DOHC 16 Valves
Output 115 ps (85.8 kw)
Displacement 2,354 cc (143.6 cu.in.)
Bore x Stroke 87 x 99 mm (3.4 x 3.9 in)
Starting Electric
Control Type Remote Control
Gear Shift Forward - Neutral - Reverse
Gear Ratio 2.14:1 (14:30)
Ignition System MicroComputer Programmed
Propeller Selection Range 13" - 25"
Transom Height 20", 25"
Fuel Unleaded Gasoline (87 Octane) or higher
Oil Type NMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity 6.7L (1.8 US Gal.) w/filter
Weight* 217 kg (478 lbs.)
Alternator Output 12V, 660W, 55A
Max. RPM Range 4,500 - 6,000
Programmed Fuel Injection Standard
Digital CD Ignition System Standard
Start In Gear Protection Standard
Thermostat Controlled Cooling System Standard
Through-The-Prop Exhaust Standard
Overheat Buzzer Standard
Power Trim and Tilt Standard
Oil Pressure Warning Standard
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Specifications and descriptions are subject to change without notice.
Model Shaft Length Cylinders Electric Start Remote Control 12V Charging
System
Power
Trim &Tilt
BFT115ALU 20" 4 S S S S
BFT115AXU 25" 4 S S S S
S:Starndard
  • Specifications subject to change without notice. Additional models and/or configurations may be available. Contact your local dealer for details.

Distributors

Use our handy database and find a distributor of your area/country.