ENGINE CARE PRODUCTS
To keep your outboard running in perfect condition, Tohatsu offers 2-stroke and 4-stroke oil, marine grease, fuel stabilizers and 4-stroke oil filters.
Tohatsu 2-Stroke TC-W3® Oil
Tohatsu Premium TC-W3 Oil is a synthetic blend that is specially formulated to work with all 2-strokes including our TLDI (direct injection) outboards. Tohatsu Premium Oil is NMMA certified and exceeds the industry minimum requirements of TC-W3 oil. Tohatsu 2-stroke oil contains additional additives and detergents to keep your Tohatsu outboard running at peak performance. Available in quarts or gallons.
|33272-3081M||TC-W3 2-Stroke Oil - Quarts|
|33272-3051M||TC-W3 2-Stroke Oil - Gallons|
Tohatsu "Complete Advantage" 100% Synthetic 2-Stroke Oil
Tohatsu 100% Synthetic 2-Stroke Oil exceeds all NMMA TC-W3 requirements and is approved for use in our TLDI (direct injection) models. Tohatsu’s newly developed “Complete Advantage” 100% Full Synthetic TLDI 2-Cycle Oil provides the following benefits over our standard 2-cycle oil :
- Exceeds the NMMA TC-W3 oil rating standard
- 100% Synthetic Oil with custom high-performance additive technology
- Far easier cold starting than competitive oils
- Ultimate lubricity & wear protection
- Engine cleanliness – reduced carbon and deposits
- Increased anti-wear additives for extended engine life
- Low smoke
- Outstanding corrosion & rust protection
- Tohatsu engineering tested and approved
|33292-3050M||Complete Advantage 2-Stroke Oil - Gallons|
Tohatsu 4-Stroke FC-W® Oil
For your 4-stroke outboard, you should use Genuine Tohatsu FC-W 4-Stroke Oil. Tohatsu 4-Stroke Oil has been specially formulated to handle the higher RPM's that outboards are subjected to as well as special rust inhibitors to combat the harsh operating conditions of the marine environment.
Genuine Tohatsu Oil reduces friction/wear and ensures the internal components are properly lubricated for optimum performance. Tohatsu FC-W 4-Stroke Oil is NMMA Certified.
|33282-3080M||FC-W 4-Stroke Oil - Quarts|
|33282-3050M||FC-W 4-Stroke Oil - Gallons|
4-Stroke Oil Filter
For maximum protection of your 4-stroke outboard, oil filters should be replaced every 100 hours and/or every 6 months with Genuine Tohatsu Oil Filters.
|3R007-6150M||All 9.9, 15, 18, 20, 25, 30, 40, 50, 60hp 4-stroke models|
|HPLM-15400-A01PE||BFT75-250 4-Stroke models|
Oil Filter Wrench
Oil Filter Wrench makes installation & removal of your oil filter a snap. A "must have" for users that change their oil & filter themselves.
|3AC99-0900M||All 9.9hp - 250hp 4-stroke models|
Tohatsu Lower Unit Gear Lube
Tohatsu marine grade 80W90 Gear Lube is designed to help minimize rust and corrosion caused by high amounts of water contamination. Contains additives and corrosion inhibitors to protect gears and bearings subject to corrosion by water seepage. Anti-foam agents ensure lubrication to all gears and bearings.
|33282-3100M||Quart (32 fl. oz.)|
|33282-3120M||5 Gallon Pail|
Tohatsu Fuel Stabilizer
Tohatsu Fuel Stabilizer for use in all 4-stroke & 2-stroke marine engines, improves engine performance by keeping the fuel fresh and the fuel system clean. Can be used for everyday use or long periods of storage. Especially recommended when using ethanol blended fuel.
Removes water to prevent corrosion and cleans carburetors and fuel injectors. Protects engine from gum, varnish, rust, and corrosion. Prolongs fuel life.
One bottle treats up to 40 gallons of gasoline.
Find a Dealer
Use our handy database to locate the dealers in your area! Search by either your zip code and address to find the Authorized Dealer/Service Center nearest you.